Surface Supplied Diving Equipment (SSDE) Diving SupervisorInquire Now
SSG Approved (SDF Training Grant, SkillsFuture Credit & PSEA)
Course Reference Number: TGS-2020501191
Funding Validity Period: Till 09 Jun 2022
Course Training Duration: 8 days (24 hours of practical, 40 hours of theory including assessment)
Mode of Training: Full-Time
This course specifies the competencies required for training and certification of Inland/Inshore diving supervisors for commercial diving operations using Surface Supplied Diving Equipment (SSDE). The course outlines the competency and training requirements for Inland/Inshore Level 4 diving supervisor qualification: SSDE Diving Supervisor (also named as Inland/Inshore Diving Supervisor) (Maximum depth 30msw) and describe the competency requirements to train dive supervisors to safely and competently plan and supervise Inland/Inshore diving operations involving SSDE.
This Standard is prepared by the Workplace Safety & Health Council (WSHC) in consultation with the Commercial Diving Association (Singapore). It should be understood by the user of this standard that the requirements contained herein are the minimum acceptable levels. All the training and assessment of commercial diver trainees shall be carried out in accordance with the requirements of the relevant legislation, codes of practices, technical advisories and guidelines e.g. Workplace Safety and Health Act (WSHA), Code of Practice for Diving at Work (Singapore Standards SS511) and Technical Advisory (TA) for Inland/Inshore Commercial Diving Safety and Health.
This Standard is the second part (Part 2) of the standards relevant to the training and certification of commercial divers, where the requirements of authorities and industry demand a prescribed standard of training and competence to ensure an adequate degree of safety and performance during diving operations. With this standard, it provides the authorities, training providers and trainees a summary of the minimum competencies required by Inland/Inshore SSDE Diving Supervisors, and details the minimum content of a training course for imparting these competencies to a trainee occupational dive supervisor.
This competency standard outlines the minimum requirements for commercial diving supervisors to work safely and competently, and to be trained/certified as a SSDE Diving Supervisor. It is intended to provide understanding, describes the theory requirements, practical application of diving knowledge, techniques required to supervise dives while using SSDE to a maximum depth of 30msw (metres of sea water).
A minimum of 4 candidates are required to start the training.
WHO SHOULD ATTEND
Suitable for individuals who are already qualified as SSDE Diver and aspires to further their commercial diving career in Singapore
(A shortlist but not limited to these positions)
- Inland/Inshore underwater construction diver
- Ships Husbandry
- Ship Hull Cleaning
- Ship Repair
- Shipyard Diving
- Underwater Welder
- Search and Recovery / Salvage Diving
- Inspection Diver
The supervisor has an overall responsibility of the above diving operations and is responsible for the dive team. He/she will be in-charged during diving operations and is responsible of the dive teams safety and health.
- The trainee must be in possession of a valid certificate of medical fitness.
- Be at least 21 years of age.
- Be able to add, subtract, multiply and divide whole numbers, decimals and fractions.
- Be able to calculate percentages; and transpose and solve simple formulas, e.g. gas laws.
- Understands written and verbal communications in English, and be able to communicate easily with other persons. Note: This is particularly important where trainees or instructors are of differing nationalities.
- Be trained and qualified as a SSDE diver; with a minimum of 1 year experience and a minimum of 150 dives logged as a SSDE Diver. - Claims to such experience must be supported with a portfolio of certified and / or formally logged supporting evidence.
- Be able to demonstrate sufficient maturity, leadership and management skills through provision of a letter of suitability for training as a diving supervisor provided by a recognised commercial diving employer.
- Holds a certificate of MOM / ISO Occupational First Aid (including CPR + AED) and Diving First Aid (Diving First Aid course may be included in the training / assessment process).
- Be trained in management of risks (MOM Accredited Risk Assessment course).
WORKING CATEGORIES for Inland/Inshore Commercial Diving (0 - 30 METRES)
Includes but not limited to underwater inspection and photography; environmental management; scientific diving; aquaculture; aquariums; underwater film production; police and emergency services rescue response; underwater engineering and construction to
a maximum depth of 30m.
Note: All dives are to be No Decompression diving.
ASSESSMENT AND CERTIFICATION
There will be many group work activities such as conduct a job specific dive briefing/ tool box talk meeting, preparation of dive plan, develop emergency response procedure, develop a dive plan, planning and implementing the dive, supervise correct actions during emergency etc.
Candidates are assessed throughout the training period and by a multiple-choice examination on the final day of the course. Upon successful completion and passed the diving supervisor training and course assessments, the delegate will be awarded with KBA Training ‘Certificate of Completion— Inland/Inshore Diving Supervisor’ and the CDAS 'Inland/Inshore' Diving Supervisor Card.
- This Standard does not apply to the supervision of diving operations conducted within the Offshore Oil & Gas industry.
- This Standard may be used to train and assess dive supervisors for any type of diving operation in the type of diving method (CSCUBA) the certification is relevant to. However, for certification to be awarded it is necessary for the diving supervisor to be competent at effectively supervising a range of common general diving operations.
- Course Fee: S$2,134 - Subject to GST and inclusive of CDAS 'Inland/Inshore' Diving Supervisor Card (delegate must fulfil the criteria set by CDAS before the certification) but not CDAS Membership
1. Skills Development Fund (SDF) Training Grant - Up to 95% subsidy (eligibility criteria apply). Absentee Payroll (AP) approved.
*Final grant amount subject to SkillsFuture Singapore Agency (SSG) approval.
Eligibility: The general eligibility criteria are listed as follows:
- Companies are registered or incorporated in Singapore
- Supportable cost components (such as Course fees) are fully sponsored by companies
- Trainees are employees who are either Singapore Citizens or Permanent Residents (PR) of Singapore
- Trainees have achieved at least 75% attendance and have sat for all examinations if the course leads to certification
NETT Fee payment. Company will pay KBAT the unfunded portion of the course fee. The training grant application submitted by the company is first routed to the training organisation for endorsement, before routing to SSG. Training organisation is responsible to submit the claim to SSG upon course completion. Upon approval of the claim, the course fee funding will be disbursed to the training organisation and Absentee Payroll funding, if applicable, will be disbursed to the company.
2. SkillsFuture Credit. All Singaporeans aged 25 and above can use their $500 SkillsFuture Credit from the government to pay for a wide range of approved skills-related courses. Visit the SkillsFuture Credit website (www.skillsfuture.sg/credit) to choose from the courses available on the Training Exchange course directory. Contact us for more information.
3. PSEA (Post-Secondary Education Account). All Singaporeans aged 30 and below can use their PSEA from the government to pay for a wide range of approved skills-related courses. Click here for more information.
* Eligibility criteria apply to all above funding.
For More Information
Please note all courses are provisional until formal confirmation and course joining details are sent.
For more information on upcoming schedule, please contact us at [email protected]
CORE Competency Units
- Singapore's Legislation and Standards
- Advanced Diving Theory: Physics
- Advanced Diving Theory: Physiology
- Dive Planning
- Operational Hazards
- Lockout/Tagout (LOTO) Procedures
- Documentation and Records
- Leadership and Communication
SPECIFIC Competency Units
- SSDE - Diving equipment, Systems, Procedures and Practices
- SSDE Diving Operations
- CSCUBA Diving Operations
|Weekdays||08:30 AM — 05:00 PM|
|Weekdays||08:30 PM — 05:00 PM|
|No. of Days:||8|
To provide professional quality training in the field of commercial diving, safety management, medical and first aid training as well as to promote safety and encourage pro-activeness among organisations.
- The largest training provider in Asia offering courses approved by International Accredited Bodies such as IMCA, NEBOSH, IOSH & IRATA and the leading accredited Training Provider for NEBOSH and IOSH courses in Asia pacific region.
- More than a decade of training excellence delivering to a wide spectrum of onshore construction and service industries and to offshore Oil & Gas and Marine industries.
- KBA’s management system has received full accreditation by ISO 9001:2008 & OHSAS 18001:2007. ...