We've noticed this is not your region.
Redirect me to my region
What do you want to learn today?

Details

Additive manufacturing (AM) describes technologies that build 3D objects by adding layer-upon-layer of material. 3D-printing (AM) can be used for rapid prototyping or to produce fully functional parts. Traditional manufacturing processes have led us to imagine designs that are limited by inherent process constraints. AM eliminates many of these constraints and could be used on an as-per requirement basis for small production quantities, unlike traditional manufacturing processes. It is important to understand the inherent benefits and challenges of this new process so as to be more prepared for opportunities that may arise through this new industry revolution.

More Course Dates:
TBA

Copy the link to your browser for Course Brochure: 
http://www.wizlogix.com/edm/3D-printing_AdditiveManufacturing/

Training Grants Available! Email us at [email protected] or Call us at +65 6272 6366 for more information & registration!

Outline

Course outline

  1. Introduction of AM process, benefits of 3D-printing
  2. Challenges in AM processes and future uses and trends
  3. Using FE modeling for the design of AM (3D-printed) components
    • Process simulation to derive warpage and residual stresses from printed parts
    • Parametric & Non-parametric optimization of 3D printed parts
    • Concept of End-to-end FE modeling process
  4. Hands-on workshop 1: Power-Bed Simulation using Finite Element Analysis
  5. Hands-on workshop 2: Laser Printing Simulation using Finite Element Analysis

Who Should Attend:

This course will be useful to design engineers, manufacturing engineers, product designers, research engineers, research scientists of product development and manufacturing, and technology and innovation strategists.

Speaker/s

Dr Long Bin, TAN

Senior Consultant Overview Interests in research pertaining to microelectronic reliability, solder characterization (mechanical and microstructural) and chip fabrication.

Interests in research pertaining to defence – with topics ranging from blast, ballistics, infrastructure reliability, acoustics, protection of personnel and infrastructure, new material development.

Adept in CAD modeling & simulation (Explicit, Standard, Heat Transfer – Transient/Steady State, Thermal Stress, Modal Analysis, Parametric Modeling, Modeling of Failure, Sub-Modeling, CFD, CEL, SPH, Adaptive Remeshing, Acoustics Analysis) of structures & materials. Interests in simulation techniques such as XFEM, FSI.

Experienced in Lab setup and management, various testing techniques, Material Characterization, Metallurgy and Failure Analysis Developed various full undergraduate modules and laboratory lessons, and also provided numerous technical courses as a trainer.

Special Offer

Group Discount

A group discount will be awarded if a group of 3 or more participants register. The fees will be lowered to $1,199 per pax.

Reviews
Be the first to write a review about this course.
Write a Review
Wizlogix was founded by our Directors, Angeline Lee and Shawn Ng in year 2000. We were awarded with our first major contract in PCB layout design from HP (Hewlett Packard), and have developed long term business relations with them ever since.
  • In 2004, Wizlogix invested in high-end EDA tools to be used for in-house layout design services and explored into additional services such as PCB prototyping fabrication and assembly.
  • In 2007, the Wizlogix Training Hub was established. Working with renowned trainers internationally, we aim to provide technical competency courses and certification programs for local engineers.
  • In 2009, we further expanded to specialize in quick turn prototyping, New Product Introduction (NPI) and High Mix Low Volume (HMLV) builds.
  • With the aim of expanding like an MNC, Wizlogix embarked on improving employee engagement through HR Capability Programmes in 2011.
  • In 2012, we became an IPC member to gear ourselves towards a worldwide industry standard in PCB qualities acceptance.
  • By 2013, Wizlogix was involved in the PCB layout of a joint commercial satellite design and development project between DSO and NTU, and the satellite design for Singapore Technologies. They are now known as ST (Satellite System). Since then, we became part of the space ecosystem in the government’s efforts towards nurturing this new industry. ...
Sending Message
Please wait...
× × Speedycourse.com uses cookies to deliver our services. By continuing to use the site, you are agreeing to our use of cookies, Privacy Policy, and our Terms & Conditions.